News
Insert the black probe into the round hole in the female end of the cord, and push the red probe into the narrow slot. You should get a reading close to 120 volts.
The probes that came with your meter probably have much in common with the probes a 1970-era meter had. ... But if you search, you can even find test probes with breadboard wire ends.
Next touch the red probe to the positive end of the battery (the end that sticks out). Enlarge Image With a confirmed 1.5 volts of direct current my multimeter proclaims this AA battery alive!
Proceed with caution to avoid any belts, fans, or other moving parts, touch the probe ends of the multimeter to the battery terminals – that should produce a reading of around 13.8-14.4 volts.
I found a pair of tweezer test probes for my multimeter which cost me just over a pound ($1.30) ... and I suspect that this is what these probes will end up being used for.
Of course the meter can only handle so much current, so you blow a fuse. Now the meter doesn't work. You need to replace the fuse. At least you didn't mess up the whole multimeter—that would be bad.
Multimeters are easy to use when testing voltage. You just turn on the unit, switch it to either the AC or DC voltage setting, stick your probes on the battery or electrical item being measured ...
Tektronix launches the first active, single-ended probe equipped with a seven-meter probe cable. A modification to the existing TAP1500 active single-ended probe, this new version features a cable ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results