Often refers to the 4-pin connectors used to attach DC power to the drives inside a PC cabinet. Molex is a large manufacturer of electronics plugs and sockets that dates back to the 1940s.

I need to get the 4 pin molex connector off the Radeon 9800 pro card.I've pulled on it as hard as I'm willing to go at this point.Any tips on removing molex ...

On page 4, there is an "IDE Power" connector. It looks a lot like a 4 pin CPU fan connector, but it (obviously) provides different voltages that are appropriate for 3.5" IDE drives (5V, 12V) and ...

Molex's roadmap for Genesis includes the x8 connector, scheduled for May 2025, the x16 model in July 2025, and a future x20 version. The Genesis design supports up to 74 pins for x8 configurations ...

The 600V (dc or peak ac) 9.5A power pins have 5mΩ resistance and suit 16 AWG wires, and the 1A phosphorous bronze signal pins have 20mΩ resistance and suit 28AWG. “Hybrid Micro-Fit+ PCIe 12V-2×6 ...

Molex has shrunk its Fit family of wire-to-PCB connectors – to 3.5mm pin-pitch to produce the Ultra-Fit range – the size of the one pictured, looking straight into the pins, is 10 x 14mm. For single ...

A new power connector, called 12VHPWR, solves that problem by delivering as much power as four 8-pin Molex connectors – 600W. It's part of the PCIe 5.0 standard, and it could start appearing on ...

You might've already seen 12VHPWR replacing some 8-pin Molex connectors on the newest power supplies. It can deliver 600W across 12 rails, four times as much as an 8-pin connector.

Graphics cards have become increasingly hungry for power, to the point where a single 8-pin Molex power connector doesn't cut it anymore, and in some cases three are required.

The EVC cable includes audio, video, parallel printer, Firewire, USB and the VESA Data Display Channel (DDC) and attaches via a 34-pin MicroCross Molex connector. The concept never caught on. The ...